The effects of heating on the physicochemical properties of tricalcium silicate root canal sealers

Abstract This study evaluated the effect of heating on the physicochemical properties and surface changes of tricalcium silicate sealers. Three tricalcium silicate root canal sealers (Bio-C Sealer, BioRoot-RCS, EndoSequence BC Sealer), and one epoxy resin-based sealer (AH Plus; control) were tested. The effect of heating on setting time (ST) and flowability were assessed according to ANSI/ADA 57 and ISO 6876 standards. Solubility and dimensional change (DC) of the set sealers were evaluated at 24 hours and after 30 days; the pH of the water used in the DC testing was also measured. Tests were repeated with heated sealers in an oven at 100 °C for 1 min. SEM and EDS analysis were performed. Data were analyzed using One-Way ANOVA and Tukey post-hoc tests (α=5%). Heating decreased the ST for AH Plus and EndoSequence (p<0.05). Heating reduced flowability (p<0.05) and increased pH for AH Plus (p<0.05). The solubility of Bio-C (dried specimens) was not in accordance with the ANSI/ADA standard. The solubility of EndoSequence was significantly higher (p<0.05) when it was heated and dried after 30 days. DC of Bio-C (24 h and 30 days), BioRoot-RCS (30 days) and AH Plus (24 h and 30 days) were not in accordance with the standards. SEM and EDS analysis showed significant changes in sealer microstructure after heating. In conclusion, heating decreased the ST and increased the solubility of EndoSequence BC sealer. No significant changes in flowability, DC, and pH were identified for all three tricalcium silicate sealers after heat application. However, all sealers had significant surface changes.

Resumo Este estudo avaliou o efeito do aquecimento nas propriedades físico-químicas e nas alterações superficiais de cimentos de silicato tricálcico. Três cimentos endodônticos de silicato tricálcico (Bio-C Sealer, BioRoot-RCS, EndoSequence BC Sealer) e um cimento à base de resina epóxi (AH Plus) foram testados para avaliar o efeito do aquecimento no tempo de presa (TP) e escoamento de acordo com as normas ANSI/ADA 57 e ISO 6876. A solubilidade e alteração dimensional (AD) dos cimentos foram avaliadas após 24 horas e 30 dias. O pH da água usada no teste de AD também foi medido. Os testes foram repetidos com cimentos aquecidos em um forno a 100 °C por 1 min. Análises em MEV e EDS foram realizadas. Os dados foram analisados pelos testes de ANOVA-1 via e post hoc de Tukey (α=5%). O aquecimento diminuiu o TP para AH Plus e EndoSequence (p<0,05). O aquecimento reduziu o escoamento (p<0,05) e aumentou o pH do AH Plus (p<0,05). A solubilidade do Bio-C (amostras desidratadas) não estava de acordo com o padrão ANSI/ADA. A solubilidade da EndoSequence foi significativamente maior (p<0,05) quando aquecida e desidratada após 30 dias. As AD de Bio-C (24 h e 30 dias), BioRoot-RCS (30 dias) e AH Plus (24 h e 30 dias) não estavam de acordo com as normas ADA e ISO. A análise em MEV e EDS mostrou alterações significativas na estrutura dos cimentos após aquecimento. Em conclusão, o aquecimento diminuiu o TP e aumentou a solubilidade do cimento EndoSequence BC. Não foram identificadas mudanças significativas no escoamento, AD e pH para os cimentos de silicato tricálcico após aquecimento. Porém, todos os cimentos tiveram alterações significativas na superfície.

Some Quality Attributes of Composite Flour and Bread Produced from Wheat and African Walnut

This study explored the potential of African walnut in the formulation of composite flour which can be used for bread production and in various food applications. African walnut flour was produced and used to substitute wheat flour at different levels (5 - 25%) in the production of wheat-African walnut composite flour. Functional and pasting properties of the composite flour were evaluated using standard procedures. Proximate composition, antioxidant activity, some loaf quality attributes and sensory acceptability of bread produced from the composite flour were evaluated using standard procedures. Wheat bread served as control. The composite flour showed varying functional properties which ranged from 2.43 to 3.46 (swelling capacity), 1.15 to 1.85 mL/g (water absorption capacity), 2.15 to 2.75 mL/g (oil absorption capacity), 10.80 to16.60% (foam capacity), 63.0 to 75.0% (dispersibility), 38.92 to 69.92 seconds (wetability), 0.75 to 0.79 g/mL (packed bulk density) and 0.43 to 0.47 g/mL (loose bulk density). Inclusion of African walnut reduced peak viscosity (53.92 – 148.83 RVU), trough viscosity (52.25 – 88.58 RVU), breakdown viscosity (1.67 – 60.25 RVU), final viscosity (74.08 – 191.25 RVU) and setback viscosity (21.83 – 102.67 RVU) of the composite flour. Composite bread had better protein (9.75 – 16.93%), fat (3.42 – 9.94%), ash (1.46 – 2.75%), crude fibre (0.86 – 3.64%) but reduced specific loaf volume (2.36 – 4.18 cm3/g) and loaf height (3.00 – 5.40cm) than the control, and exhibited appreciable antioxidant activity (DPPH: 31.60 – 73.09% and FRAP: 0.51 - 4.25 mg/g). In term of sensory acceptability composite bread samples produced with 5 and 10 % levels of African walnut compared favourably with bread produced from wheat flour. Thus composite flour produced from wheat and African walnut flours showed an array of physicochemical properties which could make it useful in different food applications. Acceptable bread could be produced from wheat flour substituted with African walnut flour at 10% level.

PHYSICOCHEMICAL AND PHYTOCHEMICAL PROPERTIES OF MARKETED SAMPLE OF HERBAL NUTRACEUTICAL SUPPLEMENTS OF SHATAVARI (ASPARAGUS RACEMOSUS)

Shatavari was called as "Queen of Herb". It improves female reproductive health including hormonal imbalance, dysfunctional uterine bleeding, polycystic ovarian syndrome, follicular growth, oocytes quality and infertility. Shatavari act as galactgogue and also as anti-inflammatory, antimicrobial and immunomodulator for many infectious diseases. The present study was carried out to analyze the physicochemical and phytochemical properties of different forms of Shatavari supplement available in local markets. Three different forms of supplement such as tablet, capsule and powder were chosen by purposive sampling technique. Experimental research design was adopted for the study. Shatavari standard sample was found to have 5.29% of moisture content. The Total ash yield was 3.70%. The percentage of acid insoluble ash was found to be 2.39 and water soluble ash was 1.21%. The water extractives value (45.72%) was considerably higher than alcohol extractive (8.91%). Physicochemical analysis of Tablet, Capsule and Powder divulge the percentage of various parameters moreover similar to standard. The pH value reported that Shatavari was slightly acidic in nature. The phytochemical study revealed the presence of bioactive components like Saponins, Tannins and Glycosides in all forms of samples including standard. The present study reported that the formulation of different forms of Shatavari supplement contains several bioactive components which was essential to consider as an ideal Herbal Nutraceutical supplements. Hence Shatavari - An Herbal Nutraceutical supplement can be suggested to promote overall Health.

Physicochemical properties, cytotoxicity and bioactivity of a ready-to-use bioceramic repair material

Abstract The aim of this study was to evaluate the physicochemical properties, cytotoxicity and bioactivity of a ready-to-use bioceramic material, Bio-C Repair (Angelus), in comparison with White MTA (Angelus) and Biodentine (Septodont). The physicochemical properties of setting time, radiopacity, pH, solubility, dimensional and volumetric changes were evaluated. Biocompatibility and bioactivity were assessed in Saos-2 osteoblast cell cultures by the MTT assay 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide), Neutral Red (NR), Alizarin Red (ARS), and cell migration tests. Statistical analysis was performed by ANOVA, Tukey or Bonferroni tests (α = 0.05). Bio-C Repair had the longest setting time (p < 0.05), but radiopacity and solubility were accordance with the ISO 6876/2012 standards, besides linear expansion. Bio-C Repair and MTA had similar volumetric change (p > 0.05); lower than Biodentine (p < 0.05). All the materials evaluated had an alkaline pH. Bio-C Repair was cytocompatible and promoted mineralized nodule deposition in 21 days and cell migration in 3 days. In conclusion, Bio-C Repair had adequate radiopacity above 3mm Al, solubility less than 3%, dimensional expansion, and low volumetric change. In addition, Bio-C Repair promoted an alkaline pH and presented bioactivity and biocompatibility similar to MTA and Biodentine, showing potential for use as a repair material.

Resumo O objetivo deste estudo foi avaliar as propriedades físico-químicas, citotoxicidade e bioatividade de um novo material biocerâmico pronto para uso, Bio-C Repair (Angelus), em comparação com MTA Branco (Angelus) e Biodentine (Septodont). Foram avaliadas as propriedades físico-químicas de tempo de presa, radiopacidade, pH, solubilidade, alterações dimensionais e volumétricas. A biocompatibilidade, bioatividade e capacidade de reparo foram avaliadas em culturas de células de osteoblastos Saos-2 pelo ensaio MTT brometo de 3-(4,5-dimetiltiazol-2-il)-2,5-difeniltetrazólio), vermelho neutro (NR), vermelho de alizarina ( ARS) e testes de migração celular. A análise estatística foi realizada pelos testes ANOVA, Tukey ou Bonferroni (α = 0,05). Bio-C Repair apresentou o maior tempo de presa (p < 0,05), mas radiopacidade e solubilidade de acordo com as normas ISO 6876/2012, além de expansão linear. Bio-C Repair e MTA tiveram variação volumétrica semelhante (p > 0,05), menor que Biodentine (p < 0,05). Todos os materiais avaliados apresentaram pH alcalino. Bio-C Repair foi citocompatível, além de promover deposição de nódulos mineralizados em 21 dias e migração celular em 3 dias. Em conclusão, o Bio-C Repair apresentou radiopacidade adequada acima de 3mmAl, solubilidade menor que 3%, expansão dimensional e baixa perda volumétrica.. Além disso, o Bio-C Repair promoveu um pH alcalino e apresentou bioatividade e biocompatibilidade semelhantes ao MTA e Biodentine, mostrando potencial para uso como material reparador

Does the ultrasonic activation of calcium silicate-based sealers affect their physicochemical properties?

Abstract This study aimed to evaluate the influence of ultrasonic activation (UA) on the physicochemical properties of hydraulic calcium silicate-based sealers. Nine experimental conditions were created based on the hydraulic calcium silicate-based sealers (Bio-C Sealer, Sealer Plus BC and Bio Root RCS) and the ultrasonic activation (no activation [NA], 10 seconds, and 20 seconds). Then the experimental groups were BC-NA, BC-10, BC-20, SPBC-NA, SPBC-10, SPBC-20, BR-NA, BR-10, and BR-20. Activation was performed with an ultrasonic insert 20/.01. The mold for the physicochemical analysis was filled and evaluated according to the ANSI/ADA specification nº. 57: initial and final setting time, flow, radiopacity and solubility. Tests were also performed to evaluate pH and calcium ion release with experimental periods of 1, 24, 72, and 168 hours with a pH meter and colorimetric spectrophotometer. Data were analyzed by one-way analysis of variance and post-hoc Tukey tests. The significance level was set at 5%. The time of UA progressively delayed the initial setting time for all hydraulic calcium silicate-based sealers (p < 0.05). Twenty seconds of UA increased the mean flow values of Sealer Plus BC and Bio-C Sealer compared to NA (p < 0.05). UA did not influence the radiopacity and solubility of the tested sealers (p > 0.05). UA for 20 seconds enhanced the pH levels and the calcium ion release of Sealer Plus BC and Bio-C Sealer at 168h (p < 0.05). UA for twenty seconds interferes with some physicochemical properties of hydraulic calcium silicate-based sealers.

Resumo Este estudo teve como objetivo avaliar a influência da ativação ultrassônica nas propriedades físico-químicas de cimentos de silicato de cálcio. Nove condições experimentais foram criadas com base nos cimentos de silicato de cálcio (Bio-C Sealer, Sealer Plus BC e Bio Root RCS) e na ativação ultrassônica (sem ativação [SA], 10 segundos e 20 segundos). Os grupos experimentais foram BC-SA, BC-10, BC-20, SPBC-SA, SPBC-10, SPBC-20, BR-SA, BR-10 e BR-20. A ativação foi realizada com um inserto ultrassônico 20/.01. O molde para a análise físico-química foi preenchido e avaliado de acordo com a especificação ANSI/ADA nº. 57: tempo de presa inicial e final, escoamento, radiopacidade e solubilidade. Também foram realizados testes para avaliação de pH e liberação de íons cálcio com períodos experimentais de 1, 24, 72 e 168 horas com pHmetro e espectrofotômetro colorimétrico. Os dados foram analisados por análise de variância one-way e testes post-hoc de Tukey. O nível de significância foi estabelecido em 5%. O tempo de AU aumentou progressivamente o tempo de presa inicial para todos os cimentos de silicato de cálcio (p < 0,05). Vinte segundos de AU aumentaram os valores médios de escoamento de Sealer Plus BC e Bio-C Sealer em comparação com SA (P < 0,05). A AU não influenciou a radiopacidade e a solubilidade dos cimentos testados (P > 0,05). AU por 20 segundos aumentou os níveis de pH e a liberação de íons cálcio de Sealer Plus BC e Bio-C Sealer em 168h (P < 0,05). AU por vinte segundos interfere em algumas propriedades físico-químicas dos cimentos de silicato de cálcio.

Physico-chemical properties of calcium silicate-based sealers in powder/liquid and ready-to-use forms

Abstract Calcium silicate-based root canal sealers have been developed in powder/liquid or premixed ready-to-use forms. The evaluation of the physico-chemical properties of a prototype powder/liquid MTApex Sealer (Ultradent) in comparison to a ready-to-use material EndoSequence BC Sealer (Brasseler) was performed. The paste/paste epoxy resin-based AH Plus (Dentsply) served as control for comparisons. The sealers were evaluated (n = 6) regarding setting time (in dry and moist environments), flow and radiopacity, following the ISO-6876/2012 standard. Also, the pH was assessed. Material's surface and chemical characterization was evaluated using scanning-electron-microscopy (SEM) and energy-dispersive-spectrometry (EDS). Mixed ANOVA, Shapiro-Wilk, Levene, and post-hoc analysis with Bonferroni correction were performed at a significance level of 5%. MTApex Sealer exhibited the highest flow and EndoSequence BC Sealer had a significantly longer setting time in dry compared to the moist environment; however, for MTApex Sealer and AH Plus no significant changes occurred when additional moisture was provided. All materials exceeded 7 mm Al of radiopacity and showed a decreasing alkalinity over the 21 day-analysis. SEM/EDS evaluation resulted in peaks of calcium, silicon, and the respective radiopacifier. The prototype powder/liquid MTApex Sealer had the highest flow and similar setting time in both dry and moist environments; opposingly, EndoSequence BC Sealer was crucially influenced by external moisture. This suggests that the powder/liquid materials' setting seems to be more predictable.

Resumo Os cimentos endodônticos obturadores à base de silicato de cálcio foram desenvolvidos em formas pó/líquido ou pré-misturadas prontas para o uso. Foi realizada a avaliação das propriedades físico-químicas de um protótipo pó/líquido MTApex Sealer (Ultradent) em comparação com um material pronto para uso EndoSequence BC Sealer (Brasseler). O cimento obturador pasta/pasta à base de resina epóxi AH Plus (Dentsply) serviu de controle para as comparações. Os cimentos foram avaliados (n = 6) quanto a: tempo de presa (em ambientes secos e úmidos), escoamento e radiopacidade, seguindo a norma ISO-6876/2012; como também o pH. A superfície do material e a caracterização química foram realizadas utilizando a microscopia eletrônica de varredura (MEV) e espectrometria dispersiva de energia (EDS). ANOVA, Shapiro-Wilk, Levene e análise post-hoc com correção de Bonferroni foram realizadas com nível de significância de 5%. O MTApex Sealer exibiu um escoamento mais alto e o EndoSequence BC Sealer teve um tempo de presa significativamente mais longo em ambiente seco em comparação com o ambiente úmido; entretanto, para MTApex Sealer e AH Plus, nenhuma mudança significativa ocorreu quando umidade adicional foi fornecida. Todos os materiais excederam 7 mm de Al de radiopacidade e mostraram uma alcalinidade decrescente ao longo dos 21 dias de análise. A avaliação MEV/EDS resultou em picos de cálcio, silício e respectivo radiopacificador. O protótipo de pó/líquido MTApex Sealer teve o maior escoamento e tempo de presa semelhante em ambientes secos e úmidos; ao contrário, o EndoSequence BC Sealer foi influenciado de maneira crucial pela umidade externa. Isso sugere que a configuração dos materiais em pó/líquido parece ser mais previsível.

Silicea terra200cH evaluated by two different spectroscopy methods: a pilot study

Spectroscopy has been shown to bea useful method to study the physicochemical properties of homeopathic preparations. Aim: In this pilot study, we comparedtwo methods (photon scattering and visible-light spectroscopy) in the physicalevaluation of Silicea terra200cH. Methodology: Italian test: Two sampleshave been examinedand compared: Silicea terra200cH and Sac lac200cH, both preparedin water solution, diluted and succussed according to German Homeopathic Pharmacopoeia(Cemon Lab, Italy).Lactose was includedbecause the first 3 potencies of Silicea terraaremadeby trituration in lactosepowder.Measurements were made using an innovative Charge-Coupled Device (CCD) camera developedby Daniele Gullà, called MIRA/CORA(proprietary name). Slight variations in chrominance and luminance due to micro-vibrational 3D phenomenawere analyzed.Allmeasurements have been performed in a dark room at a constant temperature of 22°C +/-0,2°C usingafilter with very narrow spectral bands (10 nm).The measurements have been repeated three times on both Silicea terra200cH and Sac lac200cHwithin a few minutes aftereach other.Brazilian test: In the second test, performed in Brazil, variations in absorbance were used to identify Silicea terra200cH compared with Sac lac200cH andcompared withanother control solution of non-succussed 30% alcohol, using six solvatochromic dyes, following the method developed by Cartwright [1,2]. Both homeopathic samples were imported from Italy(the same sample bottles used in the Italian test),in Brazil they have beendiluted 1:100 in 30% hydro-alcoholic solution, and submitted to 100 succussions using an automatic mechanical arm (Denise, AUTIC, Brazil) prior to being tested. Samples were inserted into dyes solutions and evaluated by visible spectroscopy (FEMTO Spectrophotometer, Brazil). Dyes were prepared in ethanol P.A., according to previous established methods [3]. Three series in triplicate were performed and the results were analyzed by ANOVA / Tukey, comparing both samples and the unsuccussed 30% hydroalcoholic control solution.Results: Italian test: Measurements of the mean entropy of the signals, statistically elaborated with T Student test,yielded a two tailed p value < 0.05, where the entropy of the signal recorded from the Silicea terra200cHsample was statistically lower than the 200cH Sac lacsample.Brazilian test: Among all tested dyes, only BDN(4-(Bis-(4-(dimethylamino)-phenyl)methylene)-1(4H)-naphthalenone) showed aninteraction with Silicea terra200cH, reproducing the conclusions obtained in [3].Conclusions: Two different spectroscopic methods were able to show signal differences betweenSilicea terra200cH andSac lac200cH, suggesting that changes in solvent organization could be involved in the homeopathic signaling process, along withchanges in dipole moments of solvent and dyes. The results are potentially in line witha recent publishedpaper [4], that supportsthe propositionthatthe lower entropy of the verum signal compared with controls could beexplained by increased coherent vibrations of the verum sample, as theoretically explained in previous literature [5].

Homeopathy and high dilutions in the context of water structure research: the experience in the 9thWorld Water Forum ­2022

Water plays a vital role in adapting natural and human systems in a climate change scenario. Understandinghow this fundamental element of life is organized and functioning is essentialtogather, disseminate, and advanceknowledge about water at the micro and nanostructure level. With developments in the different research areas, the International Panel on Water Structure­IPWS was created during the 8thWorld Water Forum(WWF)inBrasília,2018,to connect researchersspecialized inwater structure under aninterdisciplinary perspective.In 2020 a partnership between CIRAT ­International Center on Water and Transdisciplinarityand WATER­a Multidisciplinary Research Journalhasbegun, intendedto organize a special edition on Water and Transdisciplinarityto be launched during the 9thWWF, in Dakar, on March 24th, 2022, in response to the challenges of our century, with the aim to disclose advanced knowledge about water at different structural levels, leading to a new understanding of it.The whole project was organized by Prof. Leoni Bonamin, from UniversityPaulista, with the support of the Editor-in-Chief Prof. Gerald Pollack, from Washington University at Seattle. The focus was on the cross-over of information with technical quality and bold thinking, as shown in Figure 1 below.Homeopathy wasincludedamong the themes.Aftera multi-step process, in which manuscripts were received (after personal invitationssent to more than 200 researchers in the field)andevaluated in a two-step peer review processto ensure maximum scientific understanding, the result showed a set of innovative contributions in which authors were allowed to be bold in their projects while careful with the methodology. Theentire process was carried out voluntarily by all the actors involved.Thus, the whole editorial process was philanthropic, there were no costs for the authors, and all articles were published as open access. Authors from five countries participated in this project: Brazil, India, Italy, Russia, and the United States. Different sessions were organized according to the topics: "Opinion Article," "Hypotheses," "Water Structure," "High Dilutions," "Water and Environment," and "New Devices."Fiveof twelve articles reported results on high dilutions, including its physicochemical propertiesandthe implications on biological systems, such as plants and aquatic animals [1-4]. This initiative inspired all to envision the possibility of offering practical solutions to old problems involving different ways of water management, which couldreduce social gaps and improve the quality of life fairly and universally.

A comparison of the physicochemical properties of AH Plus Jet with samples taken from the beginning, middle and final portions of the automix syringe system

Aim To evaluate physicochemical properties and semi-quantitative elemental analysis of AH Plus Jet with samples from the beginning, middle and final portions of the automix syringe system. Methodology Three experimental groups based on the source of the material used (beginning, middle and final portion) were established for each of the evaluated properties. Setting time, flow and radiopacity were evaluate following ANSI/ADA n. 57 specification. Set specimens was used in the semi-quantitative elemental analysis in an energy-dispersive X ray spectroscopy and scanning-electron microscopy (EDS/SEM). Statistical analysis was performed using one-way ANOVA followed by Tukey test (P<0.05). Results Flow, setting time, solubility and EDS/SEM tests showed no significant differences among the three portions of the automix syringe (P>0.05). Radiopacity test showed significant differences in the beginning of the syringe comparing to the middle and final portions (P<0.05). EDS/SEM analysis identified the presence of C, O, Al, Ca, Zr and W. The element Al, however, was found only in the final portion of the syringe. Conclusions The results of AH Plus Jet suggested an adequate ratio of the components, without segregation between organic and inorganic components, since the results of setting time, flow, solubility and EDS/SEM analysis presented similar values regardless of the portion of the syringe from where the sealer was taken.

Physicochemical features, functional characteristics, and health benefits of cottonseed oil: a review / Benefícios à saúde humana e características físico-químicas e funcionais do óleo de semente de algodão: uma revisão

Vegetable oils have their specific physicochemical properties due to which they are playing vital role in human nutritional diet for health benefits. Cottonseed oil is obtained from various species of cotton seeds that are famous to be grown mainly for their fiber quality. The most prominently used specie is Gossypium hirsutum. It is obvious that the seeds of different variety of cotton vary as grown in diverse agroclimatic conditions with respect to oil, fats and protein contents. Cottonseed oil is routinely used for cooking and food manufacturing products. Cottonseed oil obtained after proper extraction/processing steps from crude state to refined oil in a variety of ways. Cotton crop is considered for their dual-use purpose, for fiber quality and oil production to promote health benefits in the world. Keeping in view the above facts, this review clearly demonstrated an overview about physicochemical and functional properties of cottonseed oil to promote health benefits associated with the use of this oil. The overall characteristics and all concerned health benefits of CSO will further improve their usefulness is a compact way. We have summarized a brief multi-dimensional features of CSO in all aspects up to the best of our knowledge for the end researchers who can further research in the respective aspect.

Os óleos vegetais têm propriedades físico-químicas específicas que desempenham um papel vital na dieta nutricional humana em benefício à saúde. O óleo de semente de algodão, utilizado rotineiramente no preparo e na fabricação de alimentos, é obtido através de várias espécies de sementes de algodão, famosas pela alta qualidade de sua fibra., cuja espécie mais utilizada é Gossypium hirsutum. As sementes variam, em relação ao teor do óleo, da gordura e das proteínas, de acordo com o cultivo e as diversas condições agroclimáticas. O óleo de algodão é obtido após etapas adequadas de extração das sementes e processamento do estado bruto ao refinado. Assim, a presente revisão demonstra, de maneira geral, as propriedades físico-químicas e funcionais do óleo de semente de algodão e seus benefícios à saúde humana, resumindo suas características multidimensionais. As características gerais e todos os benefícios do composto podem melhorar ainda mais se utilizadas de forma compacta, auxiliando futuros pesquisadores.

Effect of carrier materials on the properties of the andrographolide solid dispersion

Abstract In the work the andrographolide (AG)-solid dispersions (SDs) were prepared by the spray-drying method, using polyethylene glycol 8000 (PEG8000), Poloxamer188, polyvinylpyrrolidone K30 (PVPK30), Soluplus® as carrier materials. The effect of different polymers as carrier materials on the properties of the AG-SDs were studied. The results showed obvious differences in intermolecular interaction, thermal stability, drug state, powder properties, dissolution behavior, and so on of AG-SDs prepared using different polymers as carrier materials. AG-PEG8000-SD was a partial-crystalline and partial-amorphous powder with smaller surface area and pore volume, but it was easy to wetting and did not swell in contact with dissolved medium. AG-Soluplus®-SD was completely amorphous powder with larger specific surface area and pore volume, but it swelled in contact with water. Therefore, the dissolution profile of AG in AG-PEG8000-SD was similar to that in AG-Soluplus®-SD. Soluplus® and PEG8000 were suitable polymers to design AG-SDs, considering both physicochemical properties and dissolution behaviors. The results of this reseach showed that when selecting carrier materials for SD, we should not only consider the state of drugs in SD and the powder properties of SD, but also consider whether there is swelling when the carrier materials are in contact with the dissolution medium.

Geohelmintos y parámetros fisicoquímicos del suelo como indicadores de calidad ambiental en el distrito de José Crespo y Castillo, Huánuco / Geohelminths and physicochemical parameters of the soil as indicators of environmental quality in José Crespo y Castillo, Huánuco district

En la investigación se determinaron la presencia de geohelmintos y se evaluó la calidad ambiental del suelo mediante parámetros fisicoquímicos en el distrito de José Crespo y Castillo ­ Huánuco, Perú. Se detectaron y cuantificaron los geohelmintos, se caracterizó los perfiles modales y propiedades fisicoquímicas en función del Soil Taxonomy, y contraste con el estándar de calidad para el cadmio (Cd) y determinación del índice de calidad ambiental del suelo empleando el análisis de componentes principales. Los perfiles modales son Fluventic Eutrudepts, Lithic Udorthents, Typic Dystrudepts, Typic Dystrudepts - Lithic Udorthents, Typic Dystrudepts - Typic Endoaquents, Typic Endoaquents, Typic Eutrudepts - Typic Eutrudepts, Typic Udifluvents y Typic Udorthents; los parámetros fisicoquímicos textura, pH, materia orgánica, nitrógeno, fosforo disponible, potasio disponible, cadmio disponible, capacidad de intercambio catiónico efectivo, calcio, magnesio, aluminio, hidrogeno, bases y ácidos cambiables y porcentaje de saturación de aluminio, determinando que el cadmio disponible se encuentra dentro de los estándares de calidad ambiental del Perú; y el índice de calidad ambiental del suelo es de 41,48%, teniendo la calificación de un suelo regular de calidad ambiental. Y la contaminación por Ascaris lumbricoides fue en 25 de las calicatas (55,56%), presente en los 8 tipos de suelos catalogados, seguida de las unicinarias representadas por Necator americano y Ancylostoma duodenale en 14 calicatas (31,11%) de pH ligeramente a medianamente acido, y Taenias y Capilaria, ambos en el 8,29%; los geohelmintos como riesgo de salud pública, permanecen por largo de tiempo en el suelo, independientemente de la calidad y en amplios rangos de pH, favorecidos por niveles de sustratos orgánicos derivados de la antropogénesis(AU)

In the investigation, the presence of geohelminths was determined and the environmental quality of the soil was evaluated through physicochemical parameters in the district of José Crespo y Castillo - Huánuco, Peru. Geohelminths were detected and quantified and the modal profiles and physicochemical properties were characterized based on the Soil Taxonomy, and contrast with the quality standard for cadmium (Cd) and determination of the environmental quality index of the soil using the main component analysis. Modal profiles are Fluventic Eutrudepts, Lithic Udorthents, Typic Dystrudepts, Typic Dystrudepts - Lithic Udorthents, Typic Dystrudepts - Typic Endoaquents, Typic Endoaquents, Typic Eutrudepts - Typic Eutrudepts, Typic Udifluvents, and Typic Udorthents; the physicochemical parameters texture, pH, organic matter, nitrogen, available phosphorus, available potassium, available cadmium, effective cation exchange capacity, calcium, magnesium, aluminium, hydrogen, exchangeable bases and acids and percentage of aluminum saturation, determining that cadmium available is within the environmental quality standards of Peru; and the environmental quality index of the soil is 41.48%, having the qualification of a regular soil of environmental quality. And the contamination by Ascaris lumbricoides was in 25 of the pits (55.56%), present in the 8 types of cataloged soils, followed by the unicinarias represented by Necator americano and Ancylostoma duodenale in 14 pits (31.11%) of pH slightly to medium acid, and Taenias and Capilaria, both at 8.29%; As a public health risk, geohelminths remain in the soil for a long time, regardless of quality and in wide pH ranges, favored by levels of organic substrates derived from anthropogenesis(AU)

Development of diethylcarbamazine-loaded poly(caprolactone) nanoparticles for anti-inflammatory purpose: Preparation and characterization

Abstract Diethylcarbamazine-loaded nanoparticles were previously evaluated for their anti-inflammatory activity. However, little is known regarding their physicochemical properties. Thus, the purpose of this study was to physiochemically characterize diethylcarbamazine-loaded poly(caprolactone) nanoparticles and evaluate their in vitro cytotoxicity. All formulations were prepared using the double-emulsion method. The average particle size was in the ranged between 298 and 364 nm and the polydispersity indexes were below 0.3. The zeta potential values were marginally negative, which may be related to drug loading, as higher loading led to an increase in the modulus of the zeta potential values. Fourier transform infrared spectroscopy (FT-IR) and X-ray powder diffraction (XRD) analysis did not reveal any chemical interactions between the chemicals used and the absence of drug in crystalline form on the nanoparticle surfaces. The in vitro drug release study revealed a concentration-dependent release from the nanoparticles into the medium. The in vitro cytotoxicity assay demonstrated the biocompatibility of the blank and loaded nanoparticles. Hence, all formulations presented good physicochemical and safety properties, corroborating the in vivo anti-inflammatory activity, previously reported by our group.

Physicochemical features, functional characteristics, and health benefits of cottonseed oil: a review / Benefícios à saúde humana e características físico-químicas e funcionais do óleo de semente de algodão: uma revisão

Vegetable oils have their specific physicochemical properties due to which they are playing vital role in human nutritional diet for health benefits. Cottonseed oil is obtained from various species of cotton seeds that are famous to be grown mainly for their fiber quality. The most prominently used specie is Gossypium hirsutum. It is obvious that the seeds of different variety of cotton vary as grown in diverse agroclimatic conditions with respect to oil, fats and protein contents. Cottonseed oil is routinely used for cooking and food manufacturing products. Cottonseed oil obtained after proper extraction/processing steps from crude state to refined oil in a variety of ways. Cotton crop is considered for their dual-use purpose, for fiber quality and oil production to promote health benefits in the world. Keeping in view the above facts, this review clearly demonstrated an overview about physicochemical and functional properties of cottonseed oil to promote health benefits associated with the use of this oil. The overall characteristics and all concerned health benefits of CSO will further improve their usefulness is a compact way. We have summarized a brief multi-dimensional features of CSO in all aspects up to the best of our knowledge fort he end researchers who can further research in the respective aspect.

Os óleos vegetais têm propriedades físico-químicas específicas que desempenham um papel vital na dieta nutricional humana em benefício à saúde. O óleo de semente de algodão, utilizado rotineiramente no preparo e na fabricação de alimentos, é obtido através de várias espécies de sementes de algodão, famosas pela alta qualidade de sua fibra, cuja espécie mais utilizada é Gossypium hirsutum. As sementes variam, em relação ao teor do óleo, da gordura e das proteínas, de acordo com o cultivo e as diversas condições agroclimáticas. O óleo de algodão é obtido após etapas adequadas de extração das sementes e processamento do estado bruto ao refinado. Assim, a presente revisão demonstra, de maneira geral, as propriedades físico-químicas e funcionais do óleo de semente de algodão e seus benefícios à saúde humana, resumindo suas características multidimensionais. As características gerais e todos os benefícios do composto podem melhorar ainda mais se utilizadas de forma compacta, auxiliando futuros pesquisadores.

Physicochemical features, functional characteristics, and health benefits of cottonseed oil: a review

Abstract Vegetable oils have their specific physicochemical properties due to which they are playing vital role in human nutritional diet for health benefits. Cottonseed oil is obtained from various species of cotton seeds that are famous to be grown mainly for their fiber quality. The most prominently used specie is Gossypium hirsutum. It is obvious that the seeds of different variety of cotton vary as grown in diverse agroclimatic conditions with respect to oil, fats and protein contents. Cottonseed oil is routinely used for cooking and food manufacturing products. Cottonseed oil obtained after proper extraction/processing steps from crude state to refined oil in a variety of ways. Cotton crop is considered for their dual-use purpose, for fiber quality and oil production to promote health benefits in the world. Keeping in view the above facts, this review clearly demonstrated an overview about physicochemical and functional properties of cottonseed oil to promote health benefits associated with the use of this oil. The overall characteristics and all concerned health benefits of CSO will further improve their usefulness is a compact way. We have summarized a brief multi-dimensional features of CSO in all aspects up to the best of our knowledge for the end researchers who can further research in the respective aspect.

Resumo Os óleos vegetais têm propriedades físico-químicas específicas que desempenham um papel vital na dieta nutricional humana em benefício à saúde. O óleo de semente de algodão, utilizado rotineiramente no preparo e na fabricação de alimentos, é obtido através de várias espécies de sementes de algodão, famosas pela alta qualidade de sua fibra., cuja espécie mais utilizada é Gossypium hirsutum. As sementes variam, em relação ao teor do óleo, da gordura e das proteínas, de acordo com o cultivo e as diversas condições agroclimáticas. O óleo de algodão é obtido após etapas adequadas de extração das sementes e processamento do estado bruto ao refinado. Assim, a presente revisão demonstra, de maneira geral, as propriedades físico-químicas e funcionais do óleo de semente de algodão e seus benefícios à saúde humana, resumindo suas características multidimensionais. As características gerais e todos os benefícios do composto podem melhorar ainda mais se utilizadas de forma compacta, auxiliando futuros pesquisadores.

Evaluation of the quality of Amazonian butters as sustainable raw materials for applications in bioproducts

A new consumer profile for pharmaceutical and cosmetic products has motivated research into natural raw materials in the development of "green" products such as herbal medicines and biocosmetics. However, various limitations have been encountered in the marketing of these products, for example the quality control of the natural raw materials used by the industrial market. This study aims to evaluate the sensory and physicochemical parameters of murumuru (Astrocaryum murumuru Mart.), bacuri (Platonia insignis Mart.), tucuma (Astrocaryum vulgare Mart.), and ucuuba (Virola sebifera Aubl.) butters for applications in pharmaceutical and cosmetic bioproducts. The acidity and saponification as well as the iodine and peroxide indexes were evaluated and fatty acid profiles for the samples obtained by GC-MS. The sensory properties of the butters showed the appearance of solid to soft cream, color (yellow, brown, buttercup, and ochre), and characteristic odor. The melting temperatures of all butters ranged between 31 ºC and 49 °C. The acidity, saponification, iodine and peroxide indexes for the butters were of 5.82 ­ 17.73 mg (NaOH or KOH) g−1, 181.10 ­ 573.55 mg KOH g−1, 2.78 ­ 44.96 gl2 100 g−1, and 1.39 ­ 9.30 meq kg−1, respectively. From analyses of the fatty acid profiles, the major components identified were lauric acid in murumuru (40%) and ucuuba butters (73%), myristic acid in tucuma butter (53%), and palmitic acid in bacuri butter (42%). In general, the results of the analyses differed from the specifications of the supplier reports and official compendia. These findings highlight the importance of quality control in natural raw materials to ensure their functionality in pharmaceutical and cosmetic bioproducts.

Matriz extracelular de la submucosa de intestino delgado (mec- sid; sid) como biomaterial versátil en medicina regenerativa basada en ingeniería de tejidos / Extracellular matrix of small intestine submucose (mec-sid; sid) as a versatile biomaterial in regenerative medicine based on tissue engineering

Resumen Durante las últimas décadas, la submucosa del intestino delgado (SID), una matriz extracelular descelularizada (MEC) de origen natural, ha atraído atención en la reparación de tejidos porque puede proporcionar abundantes factores bioactivos y un microambiente biomimético de tres dimensiones para inducir las funciones celulares deseadas. En este artículo se revisan las últimas investigaciones sobre SID, que se centran en los siguientes aspectos: superioridad principal como una notable bioactividad, baja inmunogenicidad, reabsorbibilidad y capacidad de recelularización. Se reporta como la adhesión, proliferación, migración y diferenciación de las células se ve influenciada cuando son depositadas sobre este soporte, debido a sus características. Se presenta el gran potencial de este biomaterial para resolver los problemas de cuello de botella que se encuentran en la reparación de varios tejidos, convirtiéndola en un excelente biomaterial para uso en medicina regenerativa basada en ingeniería de tejidos. Palabras clave: Reparación de tejidos, matriz extracelular, Biomateriales, Ingeniería de tejidos, Propiedades fisicoquímicas.

Over the past decades, the small intestine submucosa (SID), a naturally occurring decellularized extracellular matrix (ECM), has attracted attention in tissue repair because it can provide abundant bioactive factors and a three-dimensional biomimetic microenvironment to induce the functions desired cell phones. This article reviews the latest research on SID, which focuses on the following aspects: main superiority as remarkable bioactivity, low immunogenicity, resorbability and recellularization capacity. It is reported how the adhesion, proliferation, migration and differentiation of cells is influenced when they are deposited on this support, due to its characteristics. The great potential of this biomaterial is presented to solve the bottleneck problems found in the repair of various tissues, making it an excellent biomaterial for use in regenerative medicine based on tissue engineering.

Pharmaceutical cocrystals: A review of preparations, physicochemical properties and applications

Pharmaceutical cocrystals are multicomponent systems in which at least one component is an active pharmaceutical ingredient and the others are pharmaceutically acceptable ingredients. Cocrystallization of a drug substance with a coformer is a promising and emerging approach to improve the performance of pharmaceuticals, such as solubility, dissolution profile, pharmacokinetics and stability. This review article presents a comprehensive overview of pharmaceutical cocrystals, including preparation methods, physicochemical properties, and applications. Furthermore, some examples of drug cocrystals are highlighted to illustrate the effect of crystal structures on the various aspects of active pharmaceutical ingredients, such as physical stability, chemical stability, mechanical properties, optical properties, bioavailability, sustained release and therapeutic effect. This review will provide guidance for more efficient design and manufacture of pharmaceutical cocrystals with desired physicochemical properties and applications.

Honokiol: A naturally occurring lignan with pleiotropic bioactivities / 中国天然药物

Honokiol is the dominant biphenolic compound isolated from the Magnolia tree, and has long been considered as the active constituent of the traditional Chinese herb, 'Houpo', which is widely used to treat symptoms due to 'stagnation of qi'. Pharmacological studies have shown that honokiol possesses a wide range of bioactivities without obvious toxicity. Honokiol protects the liver, kidneys, nervous system, and cardiovascular system through reducing oxidative stress and relieving inflammation. Moreover, honokiol shows anti-diabetic property through enhancing insulin sensitivity, and anti-obese property through promoting browning of adipocytes. In vivo and in vitro studies indicated that honokiol functions as an anti-cancer agent through multiple mechanisms: inhibiting angiogenesis, promoting cell apoptosis, and regulating cell cycle. A variety of therapeutic effects of honokiol may be associated with its physiochemical properties, which make honokiol readily cross the blood brain barrier and the blood-cerebrospinal fluid barrier, with high bioavailability. In the future, more clinical researches on honokiol are needed to fully authenticate its therapeutic values.

Research Progress of Transmembrane Transport of Oral Nanoparticles in Gastrointestinal Tract / 中国实验方剂学杂志

Oral nanoparticles （NPs） has gradually become a approach to improve oral bioavailability of biopharmaceutics classification system （BCS） Ⅱ， Ⅲ， Ⅳ drugs， and the transmembrane transport mechanism in the gastrointestinal tract largely depends on physicochemical characteristics of NPs. It would be beneficial to design the NPs with high transport efficiency and effectively improve the oral bioavailability of drugs by adopting a reasonable research model to analyze the transmembrane mechanism of the oral NPs and exactly reveal the relationship between the physicochemical properties and the transport mechanism of NPs. This review focused on summarizing the transmembrane approaches of oral NPs， comparing the advantages and disadvantages of the common cell models， concluding the potential interaction between the physicochemical properties and transmembrane process of NPs， and proposing the research strategy of transport mechanism based on in situ intestinal perfusion， with the purpose of discovering a suitable research model for studying the transport mechanism of different NPs， providing a basis for regulating the transport performance of the NPs to improve the oral bioavailability， and expanding the application of oral NPs in the development of new drugs.